SF Robotics
Discuss a project

Fabrication

Automate material handling around your existing cutters, jigs and workstations.

What we develop

We build robotic workcells around the cutters, fixtures and workstations already used in fabrication and construction-material prep.

  • Sheet, panel and profile handlingFeed and locate material at a supported work surface or fixture.
  • Machine loading and transferStage blanks and move cut or formed parts to the next operation.
  • Fixture and fastener workRegister parts against stops and scope guided fastening where the assembly calls for it.
Stacks of cut metal plates with holes in a shop parts tray
Cut metal parts staged for the next operation

Example panel handling station

  1. Feed sheet or panel stock on a supported work surface.
  2. Align it against locating stops and secure it for the operation.
  3. Transfer the supported part to inspection, fastening or the next machine.
A robot guides a supported panel to locating stops. Clamps hold it for the operation, then rollers carry it to the next station.

Datums and edge conditions

Test a range of blanks and formed parts. Verify that burrs, bent edges and surface changes still allow correct seating.

Batch changeover

Time loading, fixture adjustment and transfer between part families. Check which locators can be reused before adding tooling.

Supported material handoffs

Check part weight, overhang and support at the cutter, jig and outfeed before fixing the station layout.

Safeguarding fabrication equipment

For part presentation and fixture loading, we review machine hazards with your team using ANSI B11.0. Where the task calls for guards or other safeguards, we can specify them around applicable ANSI B11.19 requirements.

Discuss an automation project

Contact SF Robotics