SF Robotics
Discuss a project

Machine tending

Robotic loading and unloading for the machines you already run.

What we develop

We build robot cells around the doors, fixtures and control interfaces on existing machines. Here are examples we can scope.

  • CNC mills and lathesExchange blanks and finished parts at a vise, chuck or fixture.
  • Injection molding machinesRemove molded parts and hand them off to inspection, marking or a conveyor.
  • Laser cutters and enclosed 3D printersLoad material or remove finished parts where access and machine controls allow.
  • Inspection, marking and test stationsLoad parts into locating nests and route them by the station result.
Robot arm mounted beside metal guides on a worktable

A machine-tending cycle

  1. The machine signals that the process has finished and the fixture is accessible.
  2. The robot removes the finished part, loads the next blank and checks that it seats in the fixture.
  3. The robot clears the machine and hands control back to it. The finished part goes to the outfeed or inspection.
A robot loads a blank into a CNC fixture and transfers the finished part out. The machine sends cycle complete and clamp confirmed, and the robot returns robot clear.

Machine signals

Review the OEM interface or available PLC and discrete I/O with your machine team. Confirm how the cell reads machine ready, cycle complete and clamp state, and how it returns robot clear.

Part and fixture fit

Use raw and finished samples to check seating, tool clearance and grip. Include chips, coolant or heat where they affect release or handling.

Time between cycles

Time the exchange from cycle complete to ready to run, including door movement and clamping. Test recovery from a missed pick or an unseated part.

Machine access and lockout/tagout

We work with your team to define safeguards at the machine door under ANSI/A3 R15.06-2025 as applicable. For servicing, we account for the site’s lockout/tagout procedures and applicable OSHA requirements under 29 CFR 1910.147.

Discuss an automation project

Contact SF Robotics